9469300994 7-13
DGC-2020HD Specifications
The DGC-2020HD is a Listed Device as a Protective Relay applicable to the Canadian and US safety
standards and requirements by UL. The product is covered under UL File (E97033 NRGU/ NRGU7).
The DGC-2020HD ground fault protection circuit complies with the Calibration and Withstand tests of UL
1053; as required by UL6200. Field Testing is required when the DGC-2020HD is used for Ground Fault
Protection as described within UL 1053 Section 31.
See the Time Curve Characteristics chapter in the Configuration manual for the listing of curves verified to
meet UL1053.
To follow UL guidelines, replacement of the backup battery for the
real-time clock should be performed only by qualified personnel.
CE Compliance
This product has been evaluated and complies with the relevant essential requirements set forth in the
following EC Directives and by the EU legislation:
• Low Voltage Devices (LVD) - 2014/35/EU
• Electromagnetic Compatibility (EMC) - 2014/30/EU
• Hazardous Substances (ROHS2) -2011/65/EU
Harmonized Standards used for evaluation:
• EN 50178 - Electronic Equipment for use in Power Installations
• EN 61000-6-4 - Electromagnetic Compatibility (EMC), Generic Standards, Emission Standard for
Industrial Environments
• EN 61000-6-2 - Electromagnetic Compatibility (EMC), Generic Standards, Immunity for Industrial
Environments
• EN 50581 – Technical Documentation for the Assessment of Electrical and Electric Products with
Respect to the Restriction of Hazardous Substances (ROHS2)
NFPA Compliance
Designed to comply with NFPA Standard 110, Standard for Emergency and Standby Power.
EAC Mark (Eurasian Conformity)
For current certificate, see www.basler.com.
Maritime Recognition
American Bureau of Shipping (ABS) – For current certificates, see www.basler.com.
Patent
Basler Electric. Load anticipation feature. US Patent 9,574,511, filed May 21, 2015, and issued February
21, 2017.
Physical
Weight .............................................. 5.70 lb (2.59 kg)
Dimensions....................................... See the Mounting chapter.
To Next Page
Loading...
