1 2
After x5
sessions
EN EN
51
52
08 Clean
Ensure the glo™ tobacco heater has been allowed to cool
for a minimum of 5 minutes before cleaning.
Open the cleaning door at the bottom of the glo™ tobacco
heater. Use a tissue to wipe away any collected moisture from
the bottom of the device and cleaning door.
For best performance, moisture at the cleaning door and
bottom of the glo™ tobacco heater needs to be removed after
every 5 sessions.
To clean the inside of the heating chamber, open the slider
door at the top and the cleaning door at the bottom of the
glo™ tobacco heater.
Clean the heating chamber using the brush provided. For best
results, clean from both ends as required.
For best performance, the glo™ tobacco heater cleaning
chamber needs to be cleaned after 20 sessions.
09 How to clean the cleaning brush
Simply rinse brush under running water. Please make sure
that the cleaning brush is dried when using again with glo™
tobacco heater.
To Next Page
Loading...
