MNL- 0345
Page 88 Section 5 Base Edition
SECTION 5: COMPRESSOR UNIT DRIVE
5.1 Vertical Compressor Drive
The compressor is driven by the drive motor through a V-belt. The direction of rotation, as seen facing
the flywheel, is counterclockwise. Observe the arrow on the compressor block. Check the V-belt regu-
larly for damage and wear. See Paragraph 5.1.1.2. Replace if necessary.
Figure 5.1-1 Vertical Motor Mount (typical)
1. Compressor block
2. Compressor flywheel
3. V-belt
4. Spring Tension Idler
5. Compressor mount
6. Electric motor
7. V-belt sheave
To Next Page
Loading...
