To Next PageTo Next Page
Need help?Do you have a question about the Bauer 21713E-B and is the answer not in the manual?
General| Blade Size | 7-1/4 inches |
|---|---|
| Motor | 15 Amp |
| No Load Speed | 5500 RPM |
| Weight | 10.6 lbs |
| Cord Length | 8 ft |
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Provides fundamental safety guidelines applicable to all power tools.
Outlines precautions for maintaining a safe and hazard-free work environment.
Details essential safety practices related to electrical power and connections.
Emphasizes operator alertness, proper PPE, and common sense during tool operation.
Covers safe operating procedures and maintenance guidelines for power tools.
Specific safety precautions for operating cut-off machines, including wheel usage and guards.
Instructions and warnings regarding the testing and use of Ground Fault Circuit Interrupter protection.
Detailed steps and precautions to prevent dangerous tool kickback during operation.
Guidelines for reducing health risks associated with prolonged tool vibration exposure.
Explains the proper grounding procedures for tools with three-prong plugs.
Discusses the requirements and usage of double-insulated tools with two-prong plugs.
Details the GFCI protection built into the tool and its replacement requirements.
Provides guidance on the careful servicing of double-insulated tools by qualified personnel.
Explains common electrical symbols and their meanings relevant to the tool.
Identifies and describes the main components and controls of the concrete saw.
Step-by-step guide for preparing and setting up the tool before operation.
Instructions for safely installing or replacing the cutting wheel on the tool.
Details how to adjust the cutting depth guide for precise cuts.
Steps for attaching and removing the splash guard for added protection.
Instructions for mounting the guide wheels to assist in smooth operation.
How to properly position the wheel guard for optimal safety.
Explains how to engage and disengage the trigger lock for safety.
Guidance for connecting a dust collection system for dry cutting operations.
Step-by-step instructions for testing the GFCI before each use.
Explains the tool's overload warning light and motor shut-down behavior.
Procedures for cleaning, routine maintenance, and lubrication of the tool.
Lists common causes and solutions for the tool failing to start.
Addresses issues like slow operation, sudden stops, and performance degradation.
Covers problems related to excessive noise, overheating, and lack of water flow.
Comprehensive list of all parts with their corresponding numbers and descriptions.
Illustrates the assembly of the tool with numbered parts for reference.
