Bauknecht BFC 3C26 PF A User Manual (English)

Questions and Answers:

M
Miss Denise SheaAug 3, 2025
Why won't my Bauknecht BFC 3C26 PF A Dishwasher start?
- H
  houstonfaithAug 3, 2025
  Your Bauknecht Dishwasher might not start due to several reasons: it may not be plugged in properly, so ensure the plug is correctly inserted into the socket. There might be a power outage; in this case, the dishwasher will start automatically when the power returns. The dishwasher door may not be closed properly; push the door vigorously until you hear a click. If it does not respond to commands, switch off the appliance by pressing the ON/OFF button, then switch it back on after about a minute and reset the program.
T
Todd BushAug 9, 2025
What to do if my Bauknecht Dishwasher is not cleaning dishes properly?
- T
  Tina FrazierAug 9, 2025
  If your Bauknecht Dishwasher isn't cleaning dishes well, consider these possibilities: the crockery might not be arranged properly, so ensure it is arranged correctly. The spray arms might be hindered by the dishes, preventing them from rotating freely, so arrange the crockery correctly. The wash cycle might be too gentle, so select a more appropriate wash cycle. An excessive amount of foam might have been produced because the detergent has not been measured out correctly or is unsuitable for dishwashers. The cap on the rinse aid compartment might not be shut correctly, so ensure the cap of the rinse aid dispenser is closed. The filter might be soiled or clogged, so clean the filter assembly. Finally, there might be no salt, so fill the salt reservoir.
N
Nicholas CarterAug 17, 2025
What to do if my Bauknecht BFC 3C26 PF A Dishwasher won’t drain?
- A
  Alan ScottAug 17, 2025
  If your Bauknecht Dishwasher isn’t draining, it could be due to a few reasons. The wash cycle might not have finished yet, so wait until it completes. The drain hose might be bent, so check the drain hose. The sink drain pipe might be blocked, so clean the sink drain pipe. The filter might be clogged with food residues, so clean the filter.
R
Rebecca MorrisonAug 25, 2025
How to reduce excessive noise from my Bauknecht BFC 3C26 PF A?
- B
  Brooke CarlsonAug 26, 2025
  Excessive noise from your Bauknecht Dishwasher can be caused by dishes rattling against each other; arrange the crockery correctly. It can also be caused by an excessive amount of foam being produced; in this case, the detergent has not been measured out correctly or it is not suitable for use in dishwashers. Reset dishwasher by pressing the DRAIN button and run new program without detergent.

Bauknecht BFC 3C26 PF A Specifications

General

Door color	Not applicable
Water fill	Cold, Hot
Cord length	1.3 m
Control type	Touch
Product size	Full size (60 cm)
Tub material	Stainless steel
Certification	CE
Built-in display	Yes
Inlet hose length	1.55 m
Door handle colour	White
Outlet hose length	1.5 m
Appliance placement	Semi built-in
Control panel color	Black
Cutlery compartment type	Basket
Wi-Fi controlled	No
Cycle time	- min
Noise level	46 dB
Delay start (max)	24 h
Dishwashing programs	Eco 50°C, Glass/delicate, Intensive, Night, Pre-wash
Number of place settings	14 place settings
Number of washing programs	8
Number of temperature settings	5
Current	10 A
Energy efficiency scale	A to G
Water consumption per cycle	9.5 L
Energy consumption per cycle	0.93 kWh
Package depth	675 mm
Package width	625 mm
Package height	910 mm
Package weight	49000 g