Baumalight TRL620D - Check Coolant Level; Check Engine Radiator Intake Screen; Check Hydraulic Fluid Cooler

Check Coolant Level
1. Skidsteer must be parked on a level surface,
park brake engaged, lift arms fully lowered,
engine stopped and key removed. Allow engine
to cool to ambient temperature.
2. Loosen knobs (A) and pivot hydraulic oil cooler
upward. Engage pin to hold cooler in open
position.
A
A
3. Remove radiator cap (B) to check coolant level
before startup and every 10 hours. Maintain
coolant level at bottom of ller neck. If low, add
coolant specied in OEM manual.
B
Check Engine Radiator Intake Screen
Remove and check engine radiator intake screen
(A) for dirt and debris before startup and every 10
hours.
Clean with compressed air or spray wash if
required.
A
Check Hydraulic Fluid Cooler
Check hydraulic uid cooler screen (A) for dirt and
debris before startup and every 10 hours.
Clean with compressed air or spray wash if
required. Do not damage ns with high pressure
air or water.
A
26