Baumalight TRL620D - 6 Troubleshooting

6 TROUBLESHOOTING
PROBLEM CHECK SOLUTION
Engine overheating. Coolant level low. Add coolant.
Engine cooler clogged. Clean cooler.
Engine fan belt slipping. Tighten belt. Replace belt if damaged.
Air intake restricted. Replace air lter and check intake
system.
Hydraulic uid overheating. Hydraulic uid level low. Add hydraulic uid.
Hydraulic cooler clogged Clean cooler.
Hydraulic cooler fan not
running.
Check fan operation. Check fuse.
Hydraulic lter clogged. Replace lter.
Repeatedly exceeding
hydraulic system limits
causing hydraulic uid to
ow over relief valve.
Ease up operation, don’t exceed limits
of the machine.
Weak auxiliary hydraulic function
on attachment.
Hydraulic lter clogged. Replace lter.
Engine throttle set too
low.
Increase engine speed.
Hydraulic relief valve set
too low.
Contact your Baumalight dealer for
assistance.
Unit will not move. Park brake engaged. Disengage park brake.
Operator platform not
engaged.
Check operator platform to verify switch
is engaging.
Operator on board
switch not functioning
properly.
Check switch operation. Replace switch
if necessary.
Can not connect hydraulic
couplers.
Hydraulic pressure lock. Stop engine and push joystick forward
to connect one coupler and pull back to
connect the other. Ensure joystick is in
neutral position before starting engine.
33