INSTALLATION INSTRUCTIONS
This appliance must be correctly installed by a suitable qualified
person strictly in accordance with the manufacturer's instructions.
The manufacturer's declines any responsibility for injury or damage
to persons or property as a result of improper installation of this appliance.
The housing, adjacent furniture and all materials used in installation
must be able to withstand a minimum temperature of 85°C plus ambient
during periods of operation. In addition, adjacent furniture cabinet
doors must be at least 4 mm from the appliance at all points. Certain
types of vinyl or laminate kitchen furniture cabinetry are particularly
prone to heat damage and discoloration of materials which occurs
below 85°C plus ambient or where materials are less than 4 mm from
the appliance will be the liability of the owner.
This range of ovens has been designed to be located under a worktop
surface.
Two systems can be used to fit your appliance to a chosen furniture
layout:
A) Between two side panels of two distinct cabinet units without the aid
of a support shelf, by fitting four support steel brackets provided with
the product.
(See fig. 3, page 9)
B) Between two side panels each fixed to the side of a cabinet unit
without the aid of a support shelf. In this case only the two lower
support brackets will be necessary. (See fig. 4, page 9)
7
To Next Page
Loading...
