8
Note: in both of the above cases you must measure 717 mm from the
underside of the worktop and mark the correct position of the lower support
brackets before fixing them to the sides. With reference to (fig.3-page 9),
ensure the side support brackets are positioned 40 mm from the front of
the cabinet door exterior surface, as illustrated, before securing them to
the cabinet sides. If necessary, this product can be installed in a housing
unit (fig.2 - page 9). The housing unit will not be a standard one but will
have to be of a size that can accomodate the full height of the oven
-minimum height 717 mm. This housing unit will need to fulfil the ven-
IMPORTANT
Ventilation requirements
Ventilation forms a very important part of the installation of this appliance.
The ventilation requirements are shown on fig. 1 and must be adhered to.
Failure to do this can cause adverse effects to the operation of the appliance.
tilation requirements.
To Next Page
Loading...
