INSTRUCTION FOR INSTALLATION
This appliance must be installed by a competent person, in
accordance with the current version of the following UK
Regulations and Safety Standards or their European Norm
replacements:
Building Regulations (issued by the Department of Environment)
Building Standards (issued by the Scottish Development
Department)
IEE Wiring Regulations
Electricity at Work Regulations
PRE-COMMISSIONING THE APPLIANCE
When unpacked, check that the following parts are included with
the appliance:
• Baumatic Instruction and Installation Book
• 2 oven shelves .
• 2 set comprising Grill Pan, Trivet and handle.
POSITIONING THE APPLIANCE
This appliance is designed for building-in to a standard 600mm
wide tall housing.
A minimum of 4mm of distance must be allowed between the oven
and any adjacent cabinet doors and drawers to allow the side
protection rails to be fitted and form an integral part of the
installation.
The surface of any adjacent cabinets and any materials used in
the installation must be able to withstand a minimum
temperature of 85°C above ambient during periods of
operation (see corresponding notes on page 4).
17
To Next Page
Loading...
