ELECTRICAL CONNECTION
Before connecting the appliance, make sure the supply voltage
marked on the Rating Plate corresponds with the mains supply
voltage.
WARNING – THIS APPLIANCE MUST BE EARTHED
The oven must be connected to a 30 amp power supply via a
suitable isolator with an on-off switch, and protected by a 30 amp
fuse. The isolator should be easily accessible in case of
maintenance or emergency.
IMPORTANT
The wires in the mains supply lead are coloured in accordance with
the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
The wire coloured Green and Yellow must be connected to the
terminal marked ‘E’ or with the earth symbol (⊥) or coloured green
and yellow.
The wire coloured Blue must be connected to the terminal marked
‘load’ and ‘N’.
The wire coloured Brown must be connected to the terminal
marked ‘load’ and ‘L’.
Care must be taken to ensure that the temperature of the mains
supply lead does not exceed 50°C.
20
To Next Page
Loading...
