Control panel
1) ON/OFF button
2) LED display
3) Delay start buttons
4) Half load button
5) Program selection buttons
6) Rinse aid and salt indicator neons
7) Program indicator neons
Using your dishwasher
Before first use
o Install the appliance as per the installation instructions contained
within this booklet.
o Fill the water softener with 1 litre of tap water and then fill with
specialist dishwasher salt. After this you should set the water
softener level.
o Fill the rinse aid dispenser and then set the rinse aid dosage.
10
To Next Page
Loading...
