Baumatic BDI631 Insrtuction Manual

o IMPORTANT: You do not need to pour 1 litre of water into
the container when you subsequently fill the water
softener with salt.
Setting the water softener level
It is possible to regulate the amount of salt that the water softener will
release during a wash cycle. The water softener should be set to a
level that is appropriate for the hardness of your water (please refer to
the table below).
To alter the amount of salt that is released by the water softener, you
should:-
o Remove the lower basket and unscrew the cap from the water
softener.
o Locate the ring with an arrow on it that is located
on the water softener. (See figure opposite).
o When you first receive your appliance, the arrow
will be pointing to the minus symbol. Using the
water hardness chart, you should turn the arrow
to the setting that is appropriate for your water
hardness.
o The “middle” selector position is halfway between the minus and
plus symbols.
o IMPORTANT: If you are using 3 in 1 dishwasher tablets and live
in a medium or hard water area, then you should still fill the
water softener with salt. The water softener arrow should be
turned to the minus setting.
12

Baumatic BDI631 Specifications

General

Door color	Not applicable
Appliance placement	Fully built-in
Control panel color	Stainless steel
Washing class	A
Noise level	53 dB
Number of place settings	12 place settings
Number of washing programs	5
Water consumption per cycle	16 L

Weight and Dimensions

Depth	540 mm
Width	595 mm
Height	850 mm