Baumatic BDI631 Insrtuction Manual

28
Stained tub
interior
Detergent with
colourant was used
Use a detergent without colourant.
Dishes are not
fully dried
Rinse aid dispenser is
empty
Make sure that the rinse aid
dispenser is filled with rinse aid.
Dishes and
pans are not
clean
Improper program
Improper loading
Select a more intense wash program.
Make sure that the spray arms and
the detergent dispenser are not
being impeded by large dishes.
Spots and
filming on
glasses and
pans
Extremely hard water
Low inlet
temperature
Improper loading
Improper detergent
Incorrect salt/rinse
aid levels
Refer to the relevant sections of this
booklet, to ensure that the
detergent, salt and rinse aid levels
are set correctly. Ensure that the
appliance is loaded correctly.
Steam A normal
phenomenon
You may get a small amount of
steam coming through the vent by
the door latch, during drying and
water draining.
Black or grey
marks on
dishes
Aluminium utensils
have rubbed against
dishes
Use a mild abrasive cleaner to
eliminate the marks. Make sure that
the appliance is loaded correctly in
future.
Water
standing in
the bottom of
the tub
This is normal A small amount of clean water in the
base of the appliance is not
something to be concerned about.
Dishwasher
leaks
The rinse aid
dispenser is
overfilled or rinse aid
has been spilt inside
the appliance
Dishwasher isn’t
level
Take care not to overfill the rinse aid
dispenser. Spilt rinse aid could cause
oversudsing and lead to overflowing.
Wipe away any spills immediately
with a damp cloth.
Make sure that the dishwasher is
level.

Baumatic BDI631 Specifications

General

Door color	Not applicable
Appliance placement	Fully built-in
Control panel color	Stainless steel
Washing class	A
Noise level	53 dB
Number of place settings	12 place settings
Number of washing programs	5
Water consumption per cycle	16 L

Weight and Dimensions

Depth	540 mm
Width	595 mm
Height	850 mm