Control panel
1) Program indicator neons
2) Program selection button
3) Rinse aid and salt indicator neons
4) ½ load indicator neon
5) ½ load button
6) LED display
7) Delay start button
8) ON/OFF indicator neon
9) ON/OFF button
Using your dishwasher
Before first use
o Install the appliance as per the installation instructions contained
within this booklet.
o Fill the water softener with 1 litre of tap water and then fill with
specialist dishwasher salt. After this you should set the water
softener level.
o Fill the rinse aid dispenser and then set the rinse aid dosage.
10
To Next Page
Loading...
