BAUMATIC BDW16 dishwasher user manual
29
c) TENSION ADJUSTMENT OF THE DOOR
SPRING
Your dishwasher’s outer door is attached to springs. These are set at
the factory to ensure they’re at the proper tension so that the door can
open and close smoothly and conveniently.
Note: If you have installed a cover panel over the door, you will have
to adjust the door spring tension.
• Using an Allen key, rotate the adjusting screw to tighten
or slacken the steel cable. You must do this or damage to
your dishwasher may result.
The door’s spring tension is good when the door remains horizontal in
the fully opened position, yet rises to a close with the slight lift of a
finger.
29
Warning: failure to adjust the door spring
tension could result in damage to your
dishwasher!
To Next Page
Loading...
