Baumatic BDW45.1 User Manual

25
Saving energy using your dishwasher
Loading dishes
o Refer to the relevant section of this manual for instructions on
placing items in the dishwasher for the most efficient cleaning.
o Only run the dishwasher when it is full for optimum energy and
water usage.
o Check the program table to select the most efficient program
according to the size and type of the load.
o The ECONOMY program washes your items at a lower
temperature and uses less water during the cycle. That is better
for the environment and helps to cut energy costs as well as
your water bill if you’re on a water meter.
Usage
o Clean the filters regularly both to keep the dishwasher clean and
to maintain its efficiency.
o Always remember to switch the appliance off standby when you
have finished using it. £1 billion worth of energy is wasted in the
UK every year by people leaving appliances on standby.
o You do not need to rinse dishes off before loading. If you prefer
to pre-rinse, use cold water on your dishes before loading them
but do not waste water by letting it run continuously.
o Use the shorter and lower temperature cycles for everything but
the dirtiest dishes. Shorter cycles use less energy and work just
as well. Modern detergents also work just as well at lower
temperatures.

Baumatic BDW45.1 Specifications

General

Door color	Not applicable
Display type	LED
Appliance placement	Fully built-in
Control panel color	-
Washing class	A
Noise level	53 dB
Delayed start timer	Yes
Number of place settings	8 place settings
Number of washing programs	7
Water consumption per cycle	13 L
Energy consumption per cycle	0.81 kWh

Weight and Dimensions

Depth	540 mm
Width	445 mm
Height	850 mm