Fitting the carbon filters (ST2 carbon filters)
If the appliance is being used to be used in recirculation mode then it
is necessary to fit carbon filters. This will help to absorb unpleasant
odours caused by cooking.
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED THE
RANGEHOOD FROM YOUR MAINS SUPPLY.
1) Remove the grease filters.
2) Press the carbon filter
against one end of the motor,
the fixing point is in the centre
of the carbon filter.
3) Turn the carbon filter
clockwise, until you feel it click
into place.
o Repeat this process for
the second carbon filter.
You need to place a
carbon filter at either end
of the motor.
o Refit the grease filters.
o The carbon filters should be replaced every 3 - 6 months or if
they show signs of damage.
14
To Next Page
Loading...
