10
sing the gas hob U
Before first use
IMPORTANT: You should clean the hob surface (see
Cleaning and maintenance” section).
symbols will appear on the control panel, next to each
“
Switching the hob on
The following
control knob:
= gas off
arge flame: maximum setting
mall flame: minimum setting
is at the end of the anti-clockwise rotation
ust be selected between the maximum
lect a knob position between the maximum and off
t to the control knob will
(BG2.1SS)
ish to light and
b depressed, the automatic ignition
ed
off, turn the control knob fully clockwise to
the gas off position.
L
S
o The minimum setting
of the control knob.
o All operation positions m
and minimum position.
o Never se
position.
o The symbol on the control panel, nex
indicate which gas burner it operates.
Automatic ignition
To ignite a burner:
o Press in the control knob of the burner that you w
turn it anti-clockwise to the maximum position.
o If you keep the control kno
for the burner will operate.
o Once the burner is lit, turn the control knob to your requir
setting between the maximum and minimum setting symbols.
o To switch the burner
To Next Page
Loading...
