21
o There are holes on the
base or the sides of the
hob that you can fix the
four brackets to. There are
three holes in each one of
the brackets.
o You should place the
bracket on the underneath
of the hob, in a position
that is appropriate for the
aperture that you have cut out. Using the screws provided, fix
the bracket to the hob. These screws MUST be securely
tightened.
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic’s
instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance must be wired into a 32 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o The spur outlet must still be accessible even when your hob is
located in its operating position.
o Cable type: H05 RRF 3 core x 4 mm².
To Next Page
Loading...
