12
Switching the hob on
o When the hob is connected to a power supply all of the cooking
zone indicators will come on for 1 second and then go off. The
hob has now entered stand-by mode.
o Press the ON/OFF button (A).
o All of the cooking zone indicators will come on.
Switching on a zone and setting a power level
o Press the cooking zone plus button (B) of the cooking zone that
you want to use to.
o Select the power level for the cooking zone that you have
selected, by using the plus (B) and minus (C) buttons.
o Starting from level 1, it is increased by one every 0.4 seconds.
Upon reaching level 9 you cannot make any further increases.
o When the cooking zone indicator shows the power level that you
require, release the plus and minus buttons and the cooking
zone will start to heat up the pan.
IMPORTANT: The cooking zone turns off automatically after a
certain time when a cooking level is set but there is no pot
placed on it.
Switching off a zone gradually
o Press the cooking zone plus button (B) of the cooking zone that
you want to switch off.
o Press and hold down the minus button (C) until the number in
the cooking zone indicator reaches “0”.
o After a few seconds, the cooking zone will switch off.
o A flashing “H” symbol will show in the cooking zone indicator
until the temperature of the zone falls below 60°C (see the
section on the “residual heat indicator” for further information).
Switching off a zone instantly
o Press the zone plus button (B) of the cooking zone that you
want to switch off.
o Press the plus (B) and minus buttons (C) simultaneously.
To Next Page
Loading...
