o To access the rinse aid dispenser, you should turn the cap
anticlockwise to remove it and then slowly pour in liquid rinse
aid. The rinse aid dispenser will hold approximately 110 ml of
rinse aid.
o You should continue to fill with rinse aid, until the rinse aid
indicator (C) turns completely black. The black dot on the
indicator changes as the rinse aid diminishes.
o Be careful not to overfill the dispenser, as this could cause
oversudsing when a wash program is selected. Wipe away any
rinse aid excess or spillages with a damp cloth.
o Replace the cap securely into position.
o You should refill the rinse aid dispenser when the rinse aid
indicator (3) lights on the control panel.
o IMPORTANT: If you are using 3 in 1 dishwasher tablets then
you should still fill the rinse aid dispenser.
11
To Next Page
Loading...
