Water outlet
o Secure the drain hose, so that it cannot move whilst the
dishwasher is in use.
o The free end of the hose must be at a height between 40 and
100 cm and must not be immersed in water.
o Place the end of the drain hose on your drain pipe. Push it a
short way down into your drain pipe.
o IMPORTANT: Do not insert the drain hose too deeply into the
water pipe, as this may cause siphoning.
o NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL
LENGTH.
Power supply
o IMPORTANT: The electrical socket must still be accessible
once the appliance is installed.
o Consult the rating plate BEFORE making the electrical
connections. Ensure that the voltage reaching the plug is the
same as that on the rating plate.
o DO NOT REMOVE THE RATING PLATE AS THE
INFORMATION ON IT IS IMPORTANT.
o The moulded plug that is supplied with the appliance must be
placed into an earthed and insulated socket.
34
To Next Page
Loading...
