Cleaning the filters
For best performance and results, the entire filter assembly should be
thoroughly cleaned regularly (ideally after each wash cycle).
25
1. Turn the coarse filter anti-
clockwise and then lift it
upwards. Rinse out this
section under a tap to
remove any food debris
that remains in it.
2. Pull out the main filter and
rinse this under the tap to
remove any food debris
that is trapped in it.
3. Pull out the fine filter and
rinse this under the tap to
remove any food debris
that is trapped in it.
4. Place the fine filter back in its original position.
5. Place the main and coarse filter back into their original positions
in the base of the dishwasher. You must turn the coarse filter
clockwise to lock it back into position.
IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.
To Next Page
Loading...
