35
lectrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic’s
instructions.
efore connecting the appliance, make sure that the supply voltage
arked on the rating plate corresponds with your mains supply
:
o This a
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
o The spur outlet must still be accessible even when your oven is
Conn
IMPORTANT
in accordance with the
following code:
GREEN AND YELLOW EARTH
NEUTRAL
BROWN LIVE
n hown, unscrew the
cable clamp (A) and unscrew (not fully) the screws in the mains
terminal block (L, N, E)
mains cable.
o Fit the cable and refit the cable clamp (A).
o Allow sufficient cable length for the cooker to be pulled out for
cleaning, but do not let it hang closer than 50mm to the floor.
E
B
m
voltage.
THIS APPLIANCE MUST BE EARTHED.
ppliance must be wired into a 20 A double pole switched
WARNING
not be located above the appliance and no more than 1.25m
away from it.
located in its operating position.
o Cable type: H05 RRF 3 core x 2.5 mm²
ecting the mains supply cable
The wires in the mains lead are
coloured
BLUE
o Open the mains termi al block cover as s
which secure the three wires of the
To Next Page
Loading...
