36
ot
Replacing the mains supply cable
If t t be replaced by an
pp opriate replacement which can be obtained from the Baumatic
Sp
he mains supply cable should be replaced in accordance with the
fol
o witch the appliance off at the control switch.
o Open the box of the supply board.
o Replace the cable with one of the same length and in accordance
o The “green-yellow” earth wire must be connected to the terminal
o The cable can be looped if necessary, but make sure that is n
kinked or trapped when the cooker is in position.
he mains supply cable is damaged, then it mus
ra
ares Department.
T
lowing instructions:
S
o Unscrew the clamp (A) fixing the cable.
with the specification given above.
marked . It must be about 10 mm longer than the live and
neutral wires.
o The “blue” neutral wire must be connected to the terminal
st be connected to the
terminal marked with letter (L).
marked with letter (N) - the live wire mu
To Next Page
Loading...
