Changing a light bulb
14
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
T BULB, YOU MUST ENSURE THAT YOU
the grease filter (as
described on page 13).
e light bulbs ensure that they have cooled
ht fixture which is inside the exposed section of the
canopy.
o Use a screwdriver to remove the glass cover that sits over the
bulb. Unscrew the light bulb that needs to be replaced and insert
a new G4 20W (max) bulb. Then replace the glass cover.
If the lights still do not work, make sure that the bulbs are fitted
l
assistance.
o Refit the grease filter.
A LIGH
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o Remove
o Prior to touching th
down.
o Find the bulb that requires replacement, you will find it located in
the lig
o IMPORTANT: Defective bulbs should be replaced immediately.
o
properly into their housings before you call for technica
To Next Page
Loading...
