EasyManua.ls Logo

Baumatic BTC6750GL - Cooker Hood Installation Guide; Electrical Connection Procedures

Baumatic BTC6750GL
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
IMPORTANT: Before installation and usage read
all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
he manufacturer declines all responsibility in the event of the installer
iling to observe all the accident prevention regulations in force,
hich are necessary for normal use and the regular operation of the
OUR COOKER HOOD IS INTENDED FOR FITTED AND
ATION.
ble must be fitted upstream from the
electrical connection, using an omni-polar switch with a contact
distance of at least 3 mm. THE FUSE MUST BE RATED AT 3
son, using
xed wiring via a double pole switched fused spur outlet.
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found behind the grease filter.
T
fa
w
electric system.
Electrical connection
Y
PERMANENT INSTALL
o The cooker hood’s power ca
AMPS.
WARNING: THIS APPLIANCE MUST BE EARTHED. It
should only be connected by a competent per
16
fi
o is a member of the N.I.C.E.I.C. and who will comply
ith the I.E.E. and local regulations. The wires in the mains lead are
f you only find two wires in the main’s lead (blue and brown),
(UK ONLY).
We recommend that the appliance is connected by a
electrician, wh
qualified
w
coloured in accordance with the following UK code:
Blue = Neutral, Brown = Live, Green/Yellow = Ground
I
then neither must be connected to the earth terminal.

Related product manuals