21
onnecting to external ducting
connect a 125 mm ducting hose to the coupling (please note that
ected to your
discharge outlet that is suitable for cooking vapours. It should
ling and your discharge
outlet should be 3 metres, with one 90 degree bend.
9) Take the two chimney
ections (C and D).
om of
chimney section C on the
side
measurement of both
C
8) Connect the coupling to the top of the cooker hood, and then
the ducting hose is not supplied with the appliance).
o The other end of the ducting hose should be conn
have a cross section of at least 150 cm².
o The maximum distance between the coup
Fitting the chimney
s
o Rest the bott
top of the hood. You
should take care to
position the tabs on the
chimney section into the
rear of the hood.
o Mark the
sides of chimney section C
on the wall with a pencil.
To Next Page
Loading...
