22
0)
ust ensure that it is perpendicular to the hood.
himney section D.
1) Take he two pencil
arks that you made in step 9
horing holes that are cut out of the
bracket
1 Lift chimney section D upwards until it reaches the ceiling. You
m
o Mark the side measurement of both sides of chimney section D
on the wall with a pencil and then remove c
1 the fixing bracket (E) and place it between t
o Keeping the bracket in contact with the wall, use a pencil to
mark on the wall the anc
m
To Next Page
Loading...
