23
2) Using a 8 m rkings
at you made in step 11. Insert raw plugs into the holes and then use
screwdriver to secure the fixing bracket to the wall.
o Secure the top of chimney section C to the fixing bracket, using
Slide chimney section D inside of chimney section C. Then
secure the lower bracket.
3) Lift ch
racket using the screws provided.
1 m drill bit, drill out two holes on the pencil ma
th
a
o Refit chimney section C to the hood and fix it onto the hood
using the two screws that are supplied.
the screws provided.
o
secure the upper bracket to the wall, using the same method as
you have just used to
1 imney section D up to the ceiling and secure it to the fixing
b
To Next Page
Loading...
