Baumatic BTC6750GL - Cooker Hood Troubleshooting; Hood Not Starting Issues; Poor Hood Performance; Hood Switching Off Unexpectedly

26
roubleshooting
MPORTANT: If your cooker hood appears not to be operating
roperly, before contacting the Baumatic Service Department,
hecklist below.
Check that the hood is connected to the electricity supply
Check that the fan speed control is set correctly.
.
The fan speed is not set high enough
The grease filters a
gh.
check that the
The safety cut-out device has been tripped.
Turn off the hob and then wait for the safety cut-out device to
reset.
ooker hood too low,
.
T
I
p
please refer to the c
My cooker hood will not start.
o
o
My cooker hood is not working effectively
o
o re dirty and require cleaning.
o The kitchen is not well ventilated enou
o If the hood is set up for recirculation mode,
carbon filters do not need replacing.
o If the hood is set up for extraction mode, check that the ducting
hose and discharge outlet are not blocked.
My cooker hood has switched off during operation.
o
o
o IMPORTANT: If you have installed your c
the safety cut-out device will frequently trip. Your cooker hood
may become damaged if the safety cut-out device is tripped
frequently