24
ttaching the glass canopy (BTC9750GL only)
d be found with the other brackets
and screws provided with the cooker hood. If you find them
ou should unscrew
them.
o of the
o
glass sect
o IMPORTANT: You must ensure that the glass section is securely
ver tightened, otherwise excessive pressure
could be placed on the glass section.
A
o The anchoring bolts (F) shoul
already attached to the cooker hood, then y
Carefully place the glass section (Q) on the upper surface
cooker hood and then slide it back towards the wall.
Screw the anchoring bolts (F) through the relevant holes in the
ion (Q).
held in place by the anchoring bolts. However the anchoring
bolts must not be o
To Next Page
Loading...
