Selecting a separate drying program
9 Load your laundry and then close the porthole door firmly.
o IMPORTANT: The maximum amount of clothing that can be
dried in a single cycle is 3kg. If you are using program 15
(“Freshen up”), then 1kg is the maximum load size.
9 Select the most appropriate drying cycle for the garments that
you are drying, by turning the program selector knob.
o The neon above the drying selection button will light.
9 Press the Start/pause button
o After approximately 5 seconds, you will hear your washer dryer
start the drying cycle.
o Throughout the wash cycle, the LCD display will countdown the
remaining time of the drying cycle that is in progress.
o If you attempt to dry a load that is larger than 3kg or you are
drying a load of differing fabric types, then the remaining time
indicator will stop counting down and stay fixed.
At the end of a wash/drying cycle
o The washer dryer will stop automatically when it has completed
a wash cycle.
o The LCD display will show the word “End”.
o At the end of the wash program, the door will remain locked for
2 – 3 minutes before it is possible to open the door and take out
the garments.
o If the spin speed indicator neon next to the
symbol is lit, then
at the end of the wash program, the washer dryer will not have
spun the wash load.
Pausing a wash program
9 Press the Start/pause button whilst a wash cycle is in progress
and the appliance will go into pause status.
o In pause status, the Start/pause indicator neon will flash.
9 Press the Start/pause button again and the wash cycle will
continue.
18
To Next Page
Loading...
