Baumatic BWD1212 - Connecting to Water Supply

o If you are fitting the optional décor strip (see below). You should
take into account the height that this will add to the appliance,
when adjusting the levelling feet.
Fitting the décor strip
o Your appliance is supplied with an optional décor strip that can
be fitted to the top of the appliance.
9 You should screw the décor strip to the front edge of the
appliance, using the screws provided.
Connecting to the mains water supply
o Your appliance is a hot and cold fill
machine. It is necessary to
connect an inlet hose to the hot
water inlet valve and the cold
water inlet valve.
o The water inlet hoses will be
inside the drum of your washer
dryer, when you receive the
appliance.
32