Baumatic BWD1212 - Specific Error Code Explanations; Common Appliance Error Codes; Load and Communication Errors

24
Err5
o Machine does not fill to the specified level within 8 minutes.
9 Check that the inlet hose is not kinked or blocked and that the
water tap the machine is connected to is fully open.
Err6
o Motor speed abnormality
9 Contact the Baumatic Service Department.
Err7
o Motor rotation/stop abnormality
9 Contact the Baumatic Service Department.
Err8
o Machine has filled to an abnormal level.
9 Contact the Baumatic Service Department.
Err9
o Drying temperature sensor malfunction
9 Contact the Baumatic Service Department.
Err12
o Drying water sensor abnormality
9 Contact the Baumatic Service Department.
Err13
o Drying heater malfunction
9 Contact the Baumatic Service Department
Un6
o Uneven load sensed when the machine attempts to spin a wash
load.
9 Remove the clothing from the drum and then reload the washer
dryer more evenly, before attempting to spin the wash load again.
EUAr
o Communication abnormality
9 Contact the Baumatic Service Department