EasyManua.ls Logo

Baumatic MEGAWDSS - Interrupting a Programme; How to Interrupt and Resume a Cycle

Baumatic MEGAWDSS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Once you have selected the programme (using the knob
shown on previous page) & the temperatures you need for
your wash, etc., press this button to start your washing
cycle.
Note:
The button will be depressed on the console.
The ‘ON’ light will come on.
The door safety mechanism will engage at this
time.
WARNING – DO NOT INSERT ANY KIND
OF PLASTIC CONTAINER FOR DETERGENTS IN
THE DRUM. THE DRYER COULD MELT THIS
AND CAUSE DAMAGE!
Interrupting a Programme
You can interrupt a programme at any time
by pressing the ‘ON/OFF’ button. Simply
do this and wait two minutes if you have to
add or remove garments. Be careful that
the water level inside the drum is not too
high and that the temperature is not very
hot.
To resume
, once you have re-closed the
door, simply press the ‘ON/OFF’ button.
The programme will pick up where it had
left off.

Related product manuals