Baumatic MEGAWDSS - Guide to your Washer Dryers Buttons; ON; OFF Button; No Spin Button; Rinse Hold Button

6
Guide to your Washer Dryer’s Buttons
* NOTE: SEE PAGE 18 FOR DETAILS ON THE PROGRAMMER KNOB
ON / OFF BUTTON
Press this to start/stop the
machine.
RINSE HOLD
Press this to allow your
washer dryer to stop
automatically at the end of
the last rinse cycle without
draining water.
NO SPIN – Press this to allow your
washer dryer to carry out a normal
wash cycle without spin.
HALF-LOAD
Pressing this button reduces
the amount of water used
during the wash, thus saving
both water & energy. Use this
when you have only half the
maximum recommended wash
load. NOTE: This must be used
for drying clothes, see pp.20-23.