Adjustable safety glass shelves
o The shelves may be placed in any of the guide slots within the
interior of the appliance. They are protected from sliding out.
o To remove a shelf: Take off all of the items that are stored on
the shelf that you want to remove. Then whilst lifting the front of
the shelf, pull it forwards to unhook it from the slots at the rear
of the cabinet.
o To refit a shelf: When placing a shelf back inside the fridge
compartments, place the hooks into the slots at the rear of the
cabinet. Lower the front of the shelf back down again.
o IMPORTANT: You must ensure that both of the hooks are in
slots that are at the same height; otherwise the shelf will not be
level.
10
To Next Page
Loading...
