Baumer HÜBNER EExME 12 - Security Indications

MB052T1 - 11080038
Baumer_EEXME12-T1_II_DE-EN (19A1)
6
Security indications 3
3 Security indications
3.1 Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all voltage supplies and ensure machinery is stationary.
3.2 Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the device.
The mounting instructions must be followed.
• Itisessentialthatthespeciedclearancesand/oranglesareobserved.
3.3 Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.
• Never use force.
Mounting is simple when correct procedure is followed.
• Use suitable puller for dismounting.
3.4 Risk of destruction due to contamination
Dirt penetrating inside the device can damage the unit.
• Absolute cleanliness must be maintained when carrying out any work at the device.
• Never allow lubricants to penetrate the device.
3.5 Risk of destruction due to adhesive uids
Adhesiveuidscandamagetheballbearings.Dismountingadevice,securedtoashaftby
adhesive may lead to the destruction of the device.
3.6 Explosion risk
You can use the device in areas with explosive atmospheres of equipment category 2 G (Zone
1). The operation in other explosive atmospheres is not permissible.