Commissioning
BUG 3/2/20 Basic Feed Unit 43
Baumüller Nürnberg GmbH 5.96064.02
WARNING
Follow the safety information on the motor, tachometer and further electrical appliances in the respec-
tive operating and maintenance instructions.
Avoid any working practices that jeopardize safety at the machine.
After carrying out any work involving intervention in the drive – regardless of whether this involves the
motor, actual value acquisition or the power converter – the owner must carry our acceptance testing
of the machine and document it chronologically in the machine log (maintenance manual or similar).
Failure to do this may result in the owner being faced with consequences relating to liability legislation.
This is not a complete list of all the procedures necessary for safe operation of the unit. If you need
further information or have particular problems, contact BAUMÜLLER NÜRNBERG or one of our dis-
tributors.
Observe the warning information in chapter 1 of these operating instructions.
NOTE
• Before touching the modules, you must discharge electrostatic energy from your body to protect
electronic components from high voltages resulting from electrostatic charging. The easiest way to
do this is to touch a grounded conductive object before handling components.
Units containing components or modules at risk from electrostatic energy are clearly marked as
such by the sticker below.
To Next Page
Loading...
Need help?
General
