EasyManua.ls Logo

Baur PGK 50 User Manual

Baur PGK 50
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
0-1
Operating Instructions
High Voltage Testing Sets
PGK 50 and PGK 80
For High Voltage Tests up to:
50 kV DC (= PGK50) and 80 kV DC (= PGK80)
Ident No. 822-006 01/00
BAUR Prüf- und Messtechnik GmbH
Raiffeisenstrasse 8, A-6832 Sulz / Austria
Tel +43 / 55 22 / 49 41-0
Fax +43 / 55 22 / 49 4 13
e-mail: headoffice@baur.at
internet: http://www.baur.at
Question and Answer IconNeed help?

Do you have a question about the Baur PGK 50 and is the answer not in the manual?

Baur PGK 50 Specifications

General IconGeneral
DisplayDigital LCD
Test ModesDC
Safety FeaturesOverload protection, Emergency stop
Power Supply230 V, 50/60 Hz
Measurement Range0-50 kV
Accuracy±1%

Summary

Safety Precautions

Warranty Information

Product Information

Overview of Product Information

Provides a general overview of the product information section.

Design and Functionality

Details the design, construction, and operational features of the PGK testing sets.

Discharge Device Mechanism

Explains the operation and safety aspects of the built-in discharge device.

Key Operating Commands

Describes the essential buttons, switches, and their functions for operating the unit.

Display and Control Elements

Identifies and explains the purpose of all displays and controls on the unit's panel.

PGK Device Interfaces

Details the available input/output ports and their connectivity functions.

Technical Specifications PGK50/80

Lists detailed technical data, ratings, and compliance standards for the testing sets.

Load Curves for PGK Units

Presents graphical representations of the PGK's voltage-current characteristics.

Packing and Shipping Procedures

Handling Transport Damage

Instructions on how to report and claim for damages incurred during shipping.

Included Accessories and Components

Lists all standard items and accessories that are supplied with the testing set.

Test Preparation Guidelines

Overview of Test Preparation

Introduces the necessary steps for preparing the testing set for operation.

Connecting the Test Object

Detailed instructions for safely connecting the test object to the PGK unit.

Setting the Internal Timer

Guidance on how to set the timer for automated test sequences or shutdowns.

Connecting External Plotting Devices

Instructions for connecting a plotter to record test current data.

External Safety Connections

Details on connecting emergency stop switches, gates, and warning lamps.

Performing High Voltage Testing

Overview of High Voltage Testing

An introduction to the procedures for conducting high voltage tests.

Initiating High Voltage Test

Step-by-step guide to powering on and preparing the unit for high voltage output.

Determining Resistance Values

Methodology for calculating resistance based on measured voltage and current.

Safely Switching Off the PGK

Procedures for safely de-energizing and shutting down the testing set.

Unit Servicing and Maintenance

Overview of Servicing Procedures

Introduces the section on maintenance and repair of the PGK unit.

Adjusting Mains Voltage Settings

Instructions for configuring the unit for different input mains voltages.

Configuring Timer for Acoustic Signal

Procedure to enable only an acoustic signal after the set timer period.

Checking Protection Resistor Integrity

Guidance on periodically checking the transient protection resistor's resistance.

Spare Parts and Wearing Components

Related product manuals