Baur PGK 80 - User Manual

0-1
Operating Instructions
High Voltage Testing Sets
PGK 50 and PGK 80
For High Voltage Tests up to:
50 kV DC (= PGK50) and 80 kV DC (= PGK80)
Ident No. 822-006 01/00
BAUR Prüf- und Messtechnik GmbH
Raiffeisenstrasse 8, A-6832 Sulz / Austria
Tel +43 / 55 22 / 49 41-0
Fax +43 / 55 22 / 49 4 13
e-mail: headoffice@baur.at
internet: http://www.baur.at

Summary

Safety Precautions

General Safety Instructions

General cautionary notes and recommended practices for safe operation.

Personnel Requirements

Specifies requirements for personnel operating the equipment.

Intended Use and Limitations

Defines the proper application and restrictions for the testing sets.

3. Preparations for a Test

Connect Test Object

Instructions for safely connecting the equipment under test.

Set Timer

Connect External Controls

4. Performing High Voltage Test

Switch On and Perform Test

Step-by-step guide for initiating and conducting a high voltage test.

Determine Resistance Value

Switch Off PGK

Procedure for safely shutting down the testing set after use.

5. Servicing

Set Mains Voltage

Check Transient Protection Resistor

Baur PGK 80 Specifications

General

Brand	Baur
Model	PGK 80
Category	Test Equipment
Language	English