0-4
Safety Precautions, Warranty
Safety Precautions, Continued
- It is imperative to every person who is involved with the
installation, start-up, operation and maintenance to have read
and understood the complete Operating Instruction.
- It is the responsibility of the customer to ensure that only
authorized persons may be allowed to use the PGK.
The user
- is qualified and properly instructed and has the necessary
experience.
- knows the relevant standards, accident prevention rules
and operating conditions.
- is able to carry out the necessary operations and is aware of
the possible dangers involved.
- must immediately inform his superior about any conditions of
the unit that could affect safety.
- The High Voltage Testing Sets PGK50 and PGK80 are
exclusively for testing the dielectric strenght of electrical
equipment with a maximum capacity of 20 µF.
Any other or additional use is deemed to be in contravention of
the intended use. The manufacturer shall not be liable for
damage resulting from any such use. In such a case the risk
shall be borne solely by the user.
The local safety and accident prevention regulations are
always applicable to the operation of the PGK50 and PGK80.
Please read now
and avoid damage
and injury later!
Only authorized personnel!
Use the PGK50
and PGK80 as directed!
☞
At the customer’s written request we undertake to repair or replace
at our discretion and as quickly as possible all parts that become
faulty or useless as the demonstrable result of poor material, faulty
design or defective execution.
The 12 month warranty time starts with delivery.
We shall bear the costs of any faulty parts requiring replacement,
but not the costs of transport to us and back to the customer, nor the
costs of packing and insurance! We shall not be liable for any
damage resulting from normal wear and tear, improper handling,
non-observance of Operating Instruction and safety regulations.
We shall also refuse to accept any liability if the customer carries out
repairs or changes to the unit himself or has others carry out them!
The warranty does not cover damage in transit, batteries, fuses and
any readjustments in accordance with the Operating Instruction!
We draw attention in addition to the ‘General Terms of Sales and
Delivery’ of:
Warranty
12 month warranty time
BAUR Prüf- und Messtechnik GmbH, Raiffeisenstrasse 8
A-6832 Sulz / Austria
To Next Page
Loading...
Need help?
General
