5-1
5. Servicing
5. Servicing
Overview
This section describes all necessary information regarding servicing
the PGK50/80.
This section contains the following topics:
Topic Page
Set mains voltage 5-2
Timer - activate acoustic signal only 5-3
Check transient protection resistor 5-4
Servicing, without exeption, must only be carried out with
Testing Set switched off.
Strictly observe safety precautions (refer to pages 0-2!) before
starting servicing the Testing Set.
Recommended cleaning procedure:
Carefully clean dirty surfaces and connection cables of the Testing
Set with a petroleum ether moistened cloth. Please do not use
solvents, acetone, spirit, alcohol etc.!
☞
To Next Page
Loading...
