Documento riservato – A solo uso interno / Confidential document – Internal use only
DISPLAY –“INFO” mode
IMPORTANT : the following operations, it has to be carried out in fast sequence in a short time (~ 4 seconds) without
making any break during the steps:
1) with the control knob ( ) in any position turns it fully anti-clockwise to the minimum value;
2) quickly turn control knob clockwise through about a 1/4 turn;
3) again turns the control knob fully anti-clockwise to it minimum value
4) then set back the control knob to it original position.
Note: In “INFO” mode, the display alternates between the message “A00” and CH temperature
To Next Page
Loading...
