Documento riservato – A solo uso interno / Confidential document – Internal use only
Solutions for every demand of heating
The boiler’s PCB can easily be set for the operation of the boiler in
traditional heating systems 80/60°C (radiators) or in low temperature
systems 45/30°C (under-floor heating systems).
In case of mixed heating systems (high and low temperature), a
special controller is available as optional (code KFG714079610).
This appliance is only 160 mm deep and it can be installed both built-in
and wall hung. It includes:
- pump for the high temperature zone,
- pump and mixing valve for the low temperature zone,
- PCB that controls the full system (diagnostics). Its main functions are:
pump post-circulation; anti-blocking function both for pump and
mixing valve; anti-frost system, protection against overheating.
Moreover, it is possible to connect a second pump for the high
temperature zone and also an external sensor for the automatic
regulation of the heating flow water temperature.
To Next Page
Loading...
