Baxton Studio MG97151 User Manual

Full Bed
Assembly Instructions
Page 1 of 6
Assembled View
1
Note: Do not assemble
using power tools.
This can cause the bolts
to be overtightened
Use 2 People
WII-0419
Parts List
2
Headboard Panel x 1
C
Side Rail x 2
D
Long Support x 1
E
Support Leg
x 3
F
Post
x 4
G
Support Panel
x 4
H
Set of Bed Slats x 1
Hardware List
3
A
Footboard Panel x 1
B
Extra Holes
14
M6 x 100mm JCB
x 3
12
M6 x 40mm JCB
x 24
11
M6 x 20mm JCB
x 8
9
M6 x 15mm JCB
x 4
6
Barrel Nut
x 3
7
Spring Washer
x 30
8
Flat Washer
x 30
5
Wood Screw
(M4 x 32mm) x 12
1
M4 Allen Key
x 1
3
Center Rail
Bracket x 2
4
Adjustable
Foot x 3
13
M6 x 50mm JCB
x 16
M8 x 50mm JCB
x 8
10
2
M5 Allen Key
x 1

Baxton Studio MG97151 Specifications

General

Brand	Baxton Studio
Model	MG97151
Category	Indoor Furnishing
Language	English

Summary

Bed Frame Assembly Steps

Attach Adjustable Foot to Support Leg

Step 4: Secure the adjustable foot to the bottom of the support leg.

Attach Post to Support Panel

Step 5: Fit the post to the support panel using bolts and washers.

Attach Center Rail Bracket to Headboard

Attach Center Rail Bracket to Footboard

Bolt Support Panel to Side Rail

Step 8: Bolt the assembled support panel to the side rail.

Assemble Side Rail to Headboard/Footboard

Step 9: Assemble the side rail to the headboard and footboard panels.

Bolt Support Panel to Headboard/Footboard

Step 10: Bolt the assembled support panel to the headboard and footboard panels.

Bolt Long Support to Center Rail Brackets

Step 11: Bolt the long support to the center rail brackets.

Fit and Screw First Slats

Step 12: Fit first slats, assemble support leg, and screw slats to rails/support.

Fit and Screw Other Slats (Part 1)

Step 13: Fit other slats, assemble support leg, and screw slats to rails/support.

Fit and Screw Other Slats (Part 2)

Step 14: Fit other slats and screw them to the side rail and long support.

Screw Remaining Bed Slats

Step 15: Bolt and screw the remaining bed slats to the side rail.