Baxton Studio Ginaro BBT5220 User Manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION
QTY
A
CHAIR BACK
1pc
B
CUSHION SEAT
1pc
C BOX SEAT
1pc
D
FRONT LEGS
2pcs
E
BACK LEGS
1pc
F
FRONT STRETCHER
1pc
G
SIDE STRETCHER
2pcs
MODEL : BBT5220 Swivel Bar Stool
PART LIST
ITEM DESCRIPTION
QTY
1 JCBC Bolt M6 x 40mm
2pcs
2 JCBC Bolt M6 x 60mm
8pcs
3
JCBC Bolt M6 x 80mm
8pcs
4 M6 Flat Washer
18pcs
5
M6 Spring Washer 18pcs
6 Wood Screw M4 x 32mm
6pcs
7
M4 Allen Key (Ball Shape)
1pc
STEP 1
STEP 2
STEP 3
3
5
4
7
5
4
7
3
5
7
4
1
2
1
A
B
C
E
E
1 of 2
MODEL : BBT5220 SWIVEL BAR STOOL

Baxton Studio Ginaro BBT5220 Specifications

General

Product Name	Baxton Studio Ginaro BBT5220
Category	Indoor Furnishing
Material	Fabric, Wood
Color	Black
Style	Modern
Assembly Required	Yes
Frame Material	Wood
Upholstery Material	Fabric

Summary

Assembly Instructions

STEP 1

Attach front legs to the cushion seat using specified bolts and washers.

STEP 2

Connect the box seat to the cushion seat and front/back legs.

STEP 3

Attach the chair back to the assembled seat and leg structure.

STEP 4

Secure front and side stretchers to the leg assembly using screws.

STEP 5

Final assembly view of the completed swivel bar stool.