Pairing with NFC
If your Android device supports NFC, you can use this to quickly and easily pair your Bluetooth connection.
First, turn on your android device and unlock the screen (ensuring that NFC is enabled in the settings)
Next, Touch the back of your audio source to the back cover of the remote control for your Silverpoint Speaker.
(Note – if you have multiple Silverpoint Speakers, you will need to remember which remote goes with which speaker,
as the NFC chips in the remotes are individually coded to the speaker during manufacture).
Finally, conrm that you wish to connect and pair with your speaker
You can now connect and disconnect by simply touching your audio source at any time to the back of the remote.
Controlling the volume for Bluetooth music
There are volume controls available to adjust how loud your music is playing back – on the audio source itself, and on the
speaker. You will not be able to get maximum volume unless the volume is turned up to maximum both on the audio source,
and the speaker.
For optimum sound quality we suggest turning the volume to near maximum on your audio source, and then using the vol-
ume control on your speaker (rear knob or remote control) to adjust the volume output to your desired listening level.
To Next Page
Loading...